Building Whitehalls and Wherries

-3-
Building the Strongback

-4-
Mounting Forms and Shaping the Stem

-5-
Beginning the Stripping

-6-
Mounting the Inner Skeg

-7-
Shaping the Inner Skeg

-8-
Stripping to the Skeg

-9-
Final Eight Strips

-10-
The Last Two Strips

-11-
Sanding and Prepping the Hull

-12-
The Outer Stem and Skeg

-13-
Epoxy Saturation Coat

-14-
Glassing the Bottom of the Hull

-15-
Laying the Keel

-16-
Building the Skeg

-17-
Finishing off the Skeg

-18-
Keel Fillet

-19-
Filler Coat and Flipping the Hull

-20-
Taping the Transom

-21-
Glassing the inside of the Boat

-22-
Attaching the Outer Gunwales

-23-
Transom Knees and Inner Gunwales

-24-
Installing the Breasthook

-25-
Installing the long Seat Risers

-26-
Floor Supports and Long Seats

-27-
Seat Knees and Riser Fillets

-28-
Fillets and Tape on Risers and Supports

-29-
Gunwale Caps

-30-
Floorboards

-31-
Installing the Seats

-32-
Planking the Transom

-33-
Installing the Seats and Oarlocks

-34-
Wrap up and Launch