![]() |
||||||||||||||||||||||||||||
| Sure, you could hunt in that old rowboat, but it's no duck boat. A real duck boat is "shotgun stable", dog friendly and has enough room for those decoys and a hunting buddy. And if you do it yourself, it is painted to blend into your favorite hunting spot. There are a lot of different ways to hunt, and if you have a need to motor to where you need to be then this is a great 2 person, one dog hunting rig. |
||||||||||||||||||||||||||||
| This boat has a wide stable beam with a punt design and up swept stem to break through the waves but still have a stable platform up front for the dog or a stepping off point. With the addition of a small 10 to 15 hp motor, you will zip to that hunting spot at about 20 MPH and with a motor that small, you can cruise all day for just a few bucks. Add a few grass stalks, and some camo paint that blends to your favorite hunting spot and you will have a comfortable, dry, and hopefully successful hunt. |
||||||||||||||||||||||||||||
![]() |
||||||||||||||||||||||||||||
| The aft seat and the fore deck are sealed and watertight to make for a safe trip. No one wants to go under, but its nice to know that if you do, your boat isn't going to the bottom. If Sculling is your style then take a look at the "Merrymeeting bay duck boat." Or if you are looking for a great, lightweight lay out boat that is easy to paddle and ready to go on a moments notice then take a look at the "Little Rob" The power ducker is a versatile boat. When duck season is over, just pull off the blind and get ready for fishing season. |
||||||||||||||||||||||||||||
| You will love these plans is you love duck hunting! Boat statistics: Length = 15' 3" Depth at mid ship = 16" Draft = 5" Beam = 4' 7" Hull Weight @ 150 Lbs Cockpit = 3' 7" wide by up to 13 feet long |
||||||||||||||||||||||||||||
![]() |
||||||||||||||||||||||||||||
| Don't go one more season hunting without a real duck boat. If you are going to go duck hunting, you might as well give yourself the best chance possible. |
||||||||||||||||||||||||||||
![]() |
||||||||||||||||||||||||||||
| We have put together epoxy kits for the power ducker. Included with each kit is the hardener, fillet resins, layup resins, Wood flour and calibrated pumps. If you are working in temperatures between 40 and 65 degrees then order the Medium epoxy kit. If you are working above 65 degrees then order the Slow epoxy kit. |
||||||||||||||||||||||||||||
| Slow Kit for higher temperatures |
Medium Kit for lower temperatures |
|||||||||||||||||||||||||||
