If we can't interest you in a full or partial kit, we have put together the Epoxy kit that I use during the building of these boats on the videos
and have made them available here for your convenience. These kits have the hardener, the right resin for laying up glass cloth, the
thickening agent for your gluing needs as well as calibrated pumps for measuring the hardeners and LV resin and fiberglass cloth.
Canoe Plans wood strip canoes plans for wood
strip canoes cedar wood strip canoe plans canoe
Plans wood strip canoes plans for wood strip
canoes cedar wood strip canoe plans rob Roy
canoe plans
Little Rob A 14 Foot Double Paddle Solo Canoe
|
|
|
Little Rob is the perfect choice for the solo paddler who wants to be able to paddle on a moments notice. This
Nantucket Sleigh and is well suited to either larger persons up to 300 lbs or people who wish to carry a good deal
of fishing, hunting or camping gear. Stability is not a problem in this boat and it maneuvers well with a double or
kayak paddle.
Even though this boat is listed as a solo boat, if you want to carry a child with you, you can do that in this boat.
Two adults may have a problem with leg room depending on their size.
If you are the type of person that likes to lean back and take a snooze on the water, you will find this boat very
accomodating.

The first few stages of building Little Rob are
virtually the same as the other canoes.
However, after the boat is stripped and a
layer of fiberglass is laid both inside and out,
you are close to finishing up the trim work
and getting out to paddle.
The trim work on Little Rob is less
sophisticated and therefore less time
consuming than both Bay Hawk and
Companion.
Length = 14'
Max Beam = 31"
Depth = 10 7/8"
Capacity @300 lbs
You could be paddling the Little Rob in just a couple of weeks.
|