 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Jinx An 11 1/2 foot outboard racer |
Jinx was designed primarily for a class "B" stock utility racing boat. If built as
described in the instructions, it will weigh, with hardware just under 140 lbs.
This little boat finished ninth in its class out of 74 in the Albany to New York
marathon, and would have done better if the driver had not gotten lost on the
way. Jinx took on 4 foot high waves and came though unscratched.
described in the instructions, it will weigh, with hardware just under 140 lbs.
This little boat finished ninth in its class out of 74 in the Albany to New York
marathon, and would have done better if the driver had not gotten lost on the
way. Jinx took on 4 foot high waves and came though unscratched.
Jinx is a great way to fill your need for speed.
She has been clocked doing 44 MPH with a 160
lb man driving her when equipped with a 10 HP
engine and a racing lower prop.
Another advantage of Jinx is her ability to carry
a passenger and still easily plane. With an
optional front passenger seat you can bring
along a friend for the ride.
She has been clocked doing 44 MPH with a 160
lb man driving her when equipped with a 10 HP
engine and a racing lower prop.
Another advantage of Jinx is her ability to carry
a passenger and still easily plane. With an
optional front passenger seat you can bring
along a friend for the ride.
Hull Weight @ 140 LBS
Power = 10 to 25 HP outboard
Length overall = 11 1/2 feet
Breadth = 53"
Capacity @ 350 lbs excluding boat gear
Power = 10 to 25 HP outboard
Length overall = 11 1/2 feet
Breadth = 53"
Capacity @ 350 lbs excluding boat gear
These boat plans are perfect for the amateur boat builder.
These boat building plans are complete and meticulous.
These boat building plans are complete and meticulous.
The second is an epoxy kit with fillers for your glue ups for frames and panels. The amount
of epoxy supplied should be enough for all the glue as well as fiberglassing the outside of
the hull. The third option is the glue and epoxy kit with 10 yds of 6 oz cloth by 60" wide for
all the glue up operations as well as fiberglassing the outside of the boat.
of epoxy supplied should be enough for all the glue as well as fiberglassing the outside of
the hull. The third option is the glue and epoxy kit with 10 yds of 6 oz cloth by 60" wide for
all the glue up operations as well as fiberglassing the outside of the boat.