If you have ever tried to joint two pieces of fiberglass with a lap and got frustrated with fraying ends, this article is for you.there are a few reasons to join or lap fiberglass layers on boats. Typically fiberglass comes in rolls of 60" or less in width. So if you are working on a boat such as the Pea Pod used in this discussion, you will need to have more than one layer simply to cover the hull. The second reason is to add strength to specific areas of the hull. typically the bottom. For instance if you are building a small wherry or canoe that you think will be dragged up on rocky shores, you will probably want a couple of layers on the bottom. Some boat plans have specific requirements for fiberglass layups and you should never do less than what is recomended. When I write how-to's...

First, let me say that building with staples has been done many thousands of times and makes for a beautiful boat. In fact if done carefully and the staples are aligned neatly, it can be very appealing. Boat plans for canoes do not generally specify how to attach your strips as either method will work just fine. That said, if you are of the opinion that those darn little staple holes detract from the beauty of the boat then read on. The actual act of stripping without staples is a fairly easy straight forward process. There are a number of ways to accomplish it but we will get to that in a minute. The actual rub to building without staples lies in the shape of the hull. In general, if the hull has smooth curves which aren't too severe then it is a very straight forward process. When the...

Adding a little dash to your Canoe! Even if your canoe plans don't specifically call for them, you would be surprised just how easy it is to add a little flair to your canoe or rowing craft. Scuppers not only add to the looks, they also serve a purpose. when you flip your boat over it gives the water a way to exit the craft. Scuppers on bigger (trailered craft) are pretty much just for looks. As most of you know, when it comes to building your own boat, there is nothing wrong with doing something just for looks. First a little disclosure before we start making our scuppered gunwales. All of the gunwales we have here at our shop whether we are using them here or sending them out to customers are cut by machine out of long pieces of Ash. Although this is preferable, making them as outlined...

arge clear timber is getting hard to come by. This simple technique will cost you about $100 in tools, glue and jig material and give you a rock solid stem with a perfect shape. In years gone by, boat plans called for stems that were typically made from sawn timber in multiple pieces, and the pieces were glued together and assisted with through bolts. Words like rabbett and knee are seldom used on newer plans when referring to the stem. In fact most stems today are made from inner and outer stem pieces. The inner stem is actually the integral part of the hull where the outer stem typically includes the cutwater and has a primary function of protecting the bow of the boat. Not only are these two piece stems easier to build with, they are typically much stronger than a traditional stem. If...

The Basics of Boat Lofting Introduction First, let me make it perfectly clear that the vast majority of the boats on our site are lofted for you and full size patterns are provided.  There are very (very) few boats on our site that require lofting.  Boats such as the tug boat would require  a massive printer to print out patterns, and even if we could, using them would be rather impossible.  In theory, if you are prepared to take on a project the size of the tug boat, you should be able to loft as it will be invaluable in the actual building process. Let's get a piece of house cleaning out of the way first. The correct term for one who lofts is a loftsman. This person is defined as one who creates patterns or frames. For the purposes of this document, so as not to...